Assembly spray, the specialist for extreme conditions from -100 C to 800 C! ~Long-term corrosion protection and lubrication for assembling and dismantling various types of metal connections ~Protects metals from corrosive media (steam, fresh and salt water, diluted alkalis, many chemical vapors ) ~Also suitable as a solid lubricant ~Harmless in terms of the Working Materials Ordinance

• Reliably prevents seizing
• Reduces friction losses
• Ideal for threads and fits
• Prevents contact corrosion on different metals
• Protects even against salt water, diluted acids, alkalis and chemical vapors

Copper-graphite spray is silicone, PTFE, acid and resin-free or does not become resinous. Reliable protection against corrosion, wear and seizing.

Gear wheels, chains, ball bearings, roller bearings, track, bearing and track rollers, sliding surfaces and slide rails are protected by the lubricity of copper-graphite spray , do not rust or jam. Press-fit bearings do not seize, even at high temperatures and high pressure. Valves, valve seat rings, grooves, pipe connections, flanges and seals are protected from aggressive media.
Coarse and fine threads, nuts, screws, bolts, wedges, springs and bushings: Can be easily removed even after extreme thermal stress. Hinges, door and gate hangers, loading flaps and lock joints always remain functional.
Copper-graphite spray helps, for example, on agricultural machinery and equipment, trucks, semi-trailers, trailers, conveyor belts and transport rails. Buses, garbage trucks, snow plows, concrete mixers, cranes, tank trucks, excavators, bulldozers and tractors. Military equipment such as tanks, guns, pioneer vehicles, amphibious vehicles, ships and much more.
Copper-graphite spray protects against corrosion and seizing for a long time. It reduces the friction of moving parts and reduces abrasion of plastics and rubber on metal. Gives tighter connection for threads and fits. Prevents contact corrosion on various types of metal.
Copper-graphite spray guarantees an application range of -100 to +800 C. Due to its chemical composition, the copper-graphite spray is extremely pressure-resistant and protects all metals against media that promote corrosion: water vapor, fresh and salt water, diluted alkalis, and many chemical vapors. Copper-graphite spray is a harmless working material within the meaning of the Working Materials Ordinance.
Copper-graphite spray is indifferent to most gases, such as natural gas, butane, propane, noble gases, fluorocarbons and nitrogen. Only use with compressed oxygen is not possible.
Copper-graphite spray - indispensable and practical for industry and trade!
Danger and safety information:Danger: Extremely flammable aerosol. Container is under pressure: may burst if heated. Harmful to aquatic organisms, with long-term effect. Keep out of reach of children. Keep away from heat, hot surfaces, sparks, open flames and other types of ignition sources. Do not smoke. Do not puncture or burn, even after use. Protect from sunlight and do not expose to temperatures exceeding 50C. Recycle contents/container.
Physical and chemical characteristics ~Appearance: silver-colored ~Flash point: approx. -104 C (propane)Boiling point: -42 C ( propane) ~Relative density: approx. 0.95 g/cm ~Solubility in water: not miscible ~Lower explosion limit: approx. 1.5% by volume ~Upper explosion limit: approx. 10.9% by volume ~Temperature range : -50 C to approx. +1000 C Maximum average particle diameter of the plates and spheres: 15 m