--------------------------
From 25.04.2025 to 27.04.2025 you get -15% on the category thinning tools!
Go to homepage
€0.00*

€10 voucher.

If you sign up for our newsletter.
You will receive €10 for free with your next purchase.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Zur Blog-Übersicht

18/01/2024

Bale handling - how to do it right

Landtechnik
Source: landwirt.com
Bale fork adjustable with support tubes
#FA77966
Schneider Bale fork adjustable with support tubes
Sale and shipment by: FAIE Handels GmbH
Mechanically adjustable fork, optionally with support tubes 1200 mm long or heavy-duty tines 1200 mm long. Tines can be folded up for road transport. With EURO and three-point hitch for front and rear operation, opening width 900-1100 mm adjustable in 50 mm increments, bale size 900-1500 mm, material fine-grain steel QSTE380, weight 90 kg, load capacity max. 1000 kg. Version with support tubes

€699.00*
Bale fork for EURO pickup with 4 tines 1100 mm
#FA70242
Schneider Bale fork for EURO pickup with 4 tines 1100 mm
Sale and shipment by: FAIE Handels GmbH
Width 1500 mm, frame height 900 mm, frame profile tube 80x80 mm, weight 110 kg.

€679.00*
Bale fork for hay, straw and silage bales
#FA15536
Schneider Bale fork for hay, straw and silage bales
Sale and shipment by: FAIE Handels GmbH
For attachment directly to the three-point hydraulics or using a quick coupler triangle Cat. 2. Reinforced design, tine length 1100 mm.

€299.00*
Bale fork with Euro and three-point attachment, 2 tines
#FA20835
Schneider Bale fork with Euro and three-point attachment, 2 tines
Sale and shipment by: FAIE Handels GmbH
High-quality spring steel skewers, 1100 mm long, thick-walled skewer support tube with welded-in conical sleeves, distance between the tines 680mm, frame size 1080x500 mm, load capacity 1000 kg, weight approx. 58 kg.Without accessories for the three-point attachment.

€379.00*
Bale tongs with EURO holder
#FA17748
Schneider Bale tongs with EURO holder
Sale and shipment by: FAIE Handels GmbH
The latest generation of bale tongs is even more stable and robust. For use with foil bales, all components in contact with the bale are rounded and prevent any damage in advance. The gripping arms are also rounded at the front and back and are mounted at the pivot points with induction-hardened, internally lubricated bolts. The wall thickness of the pipes was also increased. These are now manufactured continuously from the cylinder to the end of the gripper arms. This measure made it possible to increase the stability of the gripper arms. All grease nipples are quickly accessible.Includes 1.5 m hydraulic hoses with connector. For round bales with a diameter of 0.9 m to 1.5 m, maximum bale weight 1000 kg, gripper arm compensation - no offset of the bales when picking up, even pressure on both sides, favorable center of gravity close to the tractor/tractor, weight 180 kg.

€1,498.00*
Bale tongs without holder
#FA20834
Schneider Bale tongs without holder
Sale and shipment by: FAIE Handels GmbH
The latest generation of bale tongs is even more stable and robust. For use with foil bales, all components in contact with the bale are rounded and prevent any damage in advance. The gripping arms are also rounded at the front and back and are mounted at the pivot points with induction-hardened, internally lubricated bolts. The wall thickness of the pipes was also increased. These are now manufactured continuously from the cylinder to the end of the gripper arms. This measure made it possible to increase the stability of the gripper arms. All grease nipples are quickly accessible.Includes 1.5 m hydraulic hoses with connector. For round bales with a diameter of 0.9 m to 1.5 m, maximum bale weight 1000 kg, gripper arm compensation - no offset of the bales when picking up, even pressure on both sides, favorable center of gravity close to the tractor/tractor, weight 180 kg Prepared for screwing or welding on mounting brackets for various makes.

€1,498.00*
Conversion to three-point hitch
#FA28479
Conversion to three-point hitch
Sale and shipment by: FAIE Handels GmbH
with the matching attachment kit for Cat.

€17.50*
Hydraulically folding bale fork with three-point and EURO mounting
#FA127032
Schneider Hydraulically folding bale fork with three-point and EURO mounting
Sale and shipment by: FAIE Handels GmbH
The hydraulically folding bale fork with 2 tines is equipped with a three-point and EURO mounting. The thick-walled zinc support tube with welded-in cone sleeves can be folded upwards hydraulically. This means that no fork protection is required for road transport. The high-quality square spring steel tines with a length of 1100 mm have an M22x1.5 mm thread and can bear loads of up to 1000 kg. The distance between the conical sleeves for the tines in the support tube is 660 mm.The spring steel tines, the hydraulic lines and the BG3 coupling plugs are included in the scope of delivery.

€798.00*
Round bale fork hydraulically adjustable with Euro standard and three-point attachment
#FA101871
Schneider Round bale fork hydraulically adjustable with Euro standard and three-point attachment
Sale and shipment by: FAIE Handels GmbH
The round bale fork can be adjusted hydraulically to different bale sizes.Gentle treatment of the silage bales thanks to rotating steel tubes attached to the heavy-duty tine 1200mm. After removing the steel pipes, the heavy-duty tines can be used to pick up bales. Attachment to the front loader via Euro mount or attachment to the three-point possibleLoad load max. 1000kgOpening width 550-1700 mmScope of delivery: support frame including hydraulic cylinder and hoses with coupling, heavy-duty tine 1200mm with attached, rotating steel tubes, weight 140 kg.

€1,449.00*

With bale forks and grippers from FAIE/Schneider, you have the right tools for optimal handling of grass and silage bales. The XL bale gripper can handle round and square bales from 500 mm to 2,200 mm in diameter safely and quickly without any adjustment work. Two 180 bar hydraulic cylinders, with their large and rigid lever arms, provide high holding force. Pivoting gripping hands made of bent, thick-walled steel tubing, with spring support, securely and gently wrap around the various bale cross-sections and the silage film.

It's also possible to go smaller. The standard round bale grab from FAIE/Schneider is also ideal for picking up hay, straw, silage, and silage bales. Its specialty is round and square bales with diameters from 900 to 1,500 mm. The square bale grab can handle an even wider range of bales, from 800 to 2,000 mm.

In any case, with every bale clamp from FAIE/Schneider you can create stable stacks and avoid loss of space.

However, if bales are primarily intended for transport, the hydraulic bale fork comes into play. It can handle bales just as large as the round bale grab. It can be attached to both the three-point linkage and the Euro hitch of the front loader. Attached rotating plastic tubes protect the silage film.

If the farmer primarily transports bales of the same size, a mechanical bale fork is an interesting option. We can offer this as a cost-effective alternative in proven FAIE/Schneider quality.


You can find all products on this topic here: Attachments and accessories!